BW Honeywell GasAlert Quattro 4-Gas Monitor QT-XWHM-R-Y-NA
The Quattro has four full-size sensors to analyze the atmosphere and monitor levels of hydrogen sulfide (H2S), carbon monoxide (CO) and the lower explosive levels of a variety of dangerous flammable/explosive/combustible gases (LEL), and to alert you to any dangerous changes in their levels.
Three different types of alarm are built into the Gas Alert Quattro to ensure that whatever confined space you are working in, should there be any danger, you will be alerted. A visual alarm with three bright warning lights, a sonic alarm which rings out at 95dB, and a vibration alert are all present.
A large LCD screen continuously displays the various gas levels; this can even be set to a flipped mode should you have the device dangling upside down on your belt.
The simple one-button operation - standard across Gas Alert devices - is present and allows you to easily operate the device and access all major functions, without the need to spend an age training your team.
The Quattro is a diffusion only gas monitor, although with the Confined Space Kit you can attach a sampling probe and use the manual aspirator for the sampling of remote areas before entry.
While in use, the Quattro continuously emits a flash of light to indicate that all sensors are functioning. This IntelliFlash System gives you complete confidence that the monitor is functioning and that the atmosphere you are working in is safe.
Rechargeable batteries are standard in the Quattro, and can be easily replaced - something that the smaller MicroClip does not allow.
Fully compatible with the MicroDock II, you can access and retrieve data logged (with the Fleet Manager II) as well as customize the alert levels for the sensors. For example, Short Term Exposure Limits (STEL; 5-15 minutes), Long Term Exposure Limits (LTEL; ~8 hours) as well as high/low values for each gas).
An optional accessory is the Deluxe Confined Space Kit.
Also available as a seperate item is the BW Calibration Gas.
Remember to calibrate every six months and regularly perform bump tests.
|Product Weight (lbs.)||.8|
|Gas Type||%LEL, O2, H2S, CO|
How much is the alkaline battery pack that is available separately? So the detector can be used both the rechargeable battery and also AA batteries if forgot to charge. Thank you!1 answer
The Alkaline battery pack (with batteries) is an easy order through our Customer Service. It's currently $50 and the part number is QT-BAT-A01.
Please give us a call at 1-800-829-9580 for help ordering.
Do these come calibrated? How often do they need calibrated?
The Quattro comes with a fully-charged battery and is calibrated and ready to use right out of the box. <br>
BW Technologies by Honeywell recommends that the sensors be calibrated at least once every 180 days (6 months). Click here for more information about <a href="https://www.pksafety.com/docs/How-Often-Do-I-Need-To-Calibrate.pdf">calibration frequency</a>.
Are extra sensors available separately?
Yes. Replacement sensors are available here in the <a href="https://www.pksafety.com/gasdetection/bw-technologies-by-honeywell-portable-gas-detectors.html">BW Quattro Sensors and Accessories Section</a> of our site.
How do you use the remote manual aspirator pump? Are there any instructions for use?1 answer
No, there aren't any instructions on use. You may refer to the manual that's provided under the "Descriptions" tab though that doesn't explain how to use the monitor.
Is the screen on this back lit for low light situations?1 answer
The BW Quattro gas detector from Honeywell has a large LCD screen that lights up when any of the buttons are pushed, and also when any of the alarms are activated.
It does not have a light sensor, that might automatically illuminate the screen in low light environments. While that might be a nice feature, conserving batteries for long run time is a more pressing concern.
Does this meter measure Oxygen concentration (e.g. to ensure atmosphere is between the range 19.5–23.5%)1 answer
The GasAlert Quattro has multiple sensors including an oxygen sensor. The oxygen alarms are set to standard OSHA set points with a low alarm of 19.5% and a high alarm of 23.5%