RAE Systems MultiRAE Lite Monitor - Pump and Wireless PGM-6208D-900W

Available - Usually ships in 4 - 6 weeks

Please note: This model comes standard with a rechargeable lithium ion battery. The 99 dollar cost for the Li-Ion battery is included in the price.

The MultiRAE Lite is a personal multi-gas monitor with optional wireless capabilities that is highly adaptable to a variety of work environments. With so many features bundled into a small handheld device, the MultiRAE Lite is quite powerful. Featuring either the diffusion (no pump) or pump model, the MultiRAE Lite can detect and provide level readouts for 1-6 gases simultaneously.

The model listed here is the pump and wireless version. In order to be compatible with the RAE Systems Dedicated Wireless Network, the wireless model is necessary. If a diffusion and wireless model is preferred, please see this model. If a wireless option is not needed, please see this model for the pump, non-wireless or this model for the diffusion, non-wireless.

The MultiRAE Lite has a wide variety of configurations using over 30 sensor options including the PID sensor and the NDIR. Workers on-site need not worry about having to carry multiple gas detector units because the MultiRAE Lite sensors are interchangeable in the field without the need to recalibrate the monitor or change settings. After the initial set-up, the sensors are virtually plug and go.

The MultiRAE Lite is a highly sophisticated gas monitor with smart features designed to help provide outstanding workplace safety. The LCD screen is one of the largest in its class providing easy readability. Screen orientation can also be automated to switch in the direction the unit is being held, which is especially useful in tight confined spaces.

The wireless option for the MultiRAE Lite allows remote safety team members to be aware of gas levels in the field. The RAE Systems Dedicated Wireless Network allows detected gas information to be broadcast over the secure network to your command center. Remote safety officers can monitor readings and respond to alarms that sound, providing enhanced safety and decreased response time in the event of an emergency. RAE Systems has also developed a new safety feature included in the MultiRAE Lite - the Man Down Alarm. If the gas detection monitor does not register movement of the unit over a set amount of time, the alarm will sound, notifying the team (and with the wireless option, the remote command center) that a team member is down. This new alarm can greatly enhance rescue response times and adds to the safety and productivity of your team.

The MultiRAE Lite monitor has the 10.6eV ppm PID reading at 1-1000 ppm with a resolution of 0.1 ppm. If there is a need for greater sensitivity of PID readings, the MultiRAE or the MultiRAE Pro can be excellent options.

Key Features:

  • Available in pump or diffusion

  • 30 intelligent sensors available

  • LCD display

  • Real-time reading of gasses

  • Man down alarm

  • Datalogging

  • IP-65 Rating for pumped model and IP-67 rated for diffusion model

  • CSA, ATEX and IECEx certified

  • 18 different languages to choose from

  • 2 year warranty on non-consumable components and catalytic LEL, CO, H2S, and O2 sensors

  • 1 Year warranty on all other sensors, pump, battery, and other consumable parts

Monitor Only Includes:

  • MultiRAE Lite Monitor with sensors, battery, and wireless option as specified

  • Protective rubber boot

  • Filters

  • Datalogging

  • Travel charger/PC communications adapter

  • PC communications cable

  • AC adapter

  • Calibration adapter

  • Alkaline battery adapter

  • Hex tool

  • Quick start guide

  • CD with documentation

  • ProRAE Studio II instrument configuration and data management software

  • Calibration and test certificate

  • Warranty/registration card

Pump Model Adds:

  • Built-in pump

  • Belt clip installed

  • 3 spare external filters

  • PID sensor cap removal

Optional Accessories:

  • Confined Space Kit (CSK1):

  • Kit includes a hard transport case with custom foam, remote sample draw kit (10 inch aluminum sample probe with replacement filters), 3 hydrophobic barrier filters, 10 feet self-coiling Teflon tubing with Luer-style quick connect fitting.

Optional Calibration Kits:

  • Confined Space Kit 2 (CSK2):

  • Includes canister of 4-gas mix(34L; 50 percent LEL, 18 percent O2, 10 PPM H2S, 50 PPM CO) with regulator, case and other items in CSK1.
  • Confined Space Kit 3 (CSK3):

  • Includes 100PPM Isobutylene gas (34L) with regulator, case and other items in CSK1.
  • Confined Space kit 4 (CSK4):

  • Includes canister of 4-gas mix (34L; 50 percent LEL, 18 percent O2, 10 PPM H2S, 50 PPM CO) with regulator , canister of 100PPM Isobutylene gas (34L) with regulator, case and other items in CSK1.

Ordering Notes :

  • PID sensors require a pump

  • NDIR combustible sensors require a pump

  • NDIR Vol. combustible sensor must be accompanied by the catalytic LEL sensor

  • CIO2 and H2S sensors cannot be installed in same instrument

  • NO and NH3 sensors cannot be installed in the same instrument

FAQs: How Often Do I Need To Calibrate My Monitor?

Part Numbers:
MAB3-A2C112E-420 - Monitor only: O2, LEL, CO, H2S, 10.6evPID, Pump, Rechargeable Li-Ion battery
MAB3-A2C112E-421 - Monitor for O2, LEL, CO, H2S, 10.6evPID, Pump, Rechargeable Li-Ion battery, plus accessories and Confined Space kit without gas and regulator Accessories / Conf. Space + 4-gas (LEL/O2/CO/H2S) Cal. Kit (with 1 regulator)
MAB3-A2C112E-42M - Monitor for O2, LEL, CO, H2S, 10.6evPID, Pump, Rechargeable Li-Ion battery Li-Ion, Accessories / Confined Space and Calibration 4-gas + 100 ppm Iso Cal. Kit (with 2 regulators)

More Information
Price $1,281.00
Weight 3.0000
Brand RAE Systems
MPN PGM-6208-900W
Type Multi-Gas
Gas Type No
5th Sensor No
Color No
Write Your Own Review
You're reviewing:RAE Systems MultiRAE Lite Monitor - Pump and Wireless PGM-6208D-900W
Your Rating

2 Item(s)

Show per page
  1. Todd

    2014-04-01 17:44:21

    Does this monitor have the option of adding a CO2 sensor?

    1 answer
    1. Justin

      2014-04-01 17:44:21

      Yes. Because of the monitor configuration it will only fit into the Sensor #1 slot.

  2. Richard Barrett

    2014-12-12 18:18:51

    how does the wireless work? are other detection meters needed to for other personnel? is a laptop required to view the wireless detection readings?

    1 answer
    1. Chris

      2014-12-12 18:18:51

      The RAE Systems wireless offering can be a little daunting at first. I’ll sketch out a few of the basics here, but you may find it useful to give us a call. We can review the type of application you have in mind, and make recommendations. RAE Systems has its own proprietary wireless systems. Depending on your budget and needs there are 2 options.
      First, we have the Echo view system. This can display the information from up to 8 gas detectors at one time. The standard range of the Echo view host is 330ft., though this can be increased to 990ft with the use of Mesh routers.
      The second option is to use ProRAE Guardian software installed on a computer. The software is a subscription service and cost is based on the number of units deployed. Put simply, a gas monitor will be worn by the user in addition to a RaeLink3 Mesh Transmitter. A transmitter is also connected to the host computer to act as a receiver. The information is then beamed from the gas detector to the computer via the transmitters. The value of this system is in the powerful software, it’s ideally suited for haz mat response or large facilities monitoring multiple locations simultaneously.

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.